عربي
English
Français
Deutsch
Русский
Italiano
Español
Português
แบบไทย
中文
Direct Source: 26268120 Cogged V Belt for CLAAS HN2900Le with Aramid Cord
The 26268120 cogged V-belt is purpose‑built for the CLAAS combine harvester, where it must endure constant flexing and heavy shock loads. We engineer this belt from scratch in our own 95，000㎡ production complex, reinforcing it with high‑tenacity aramid cord that virtually eliminates stretching and a proprietary chloroprene compound developed in our CNAS‑accredited laboratory.
Every batch is tested to confirm it delivers the same fit and staying power as the original CLAAS part, so you can install it and confidently return to the field knowing the drive train will keep working harvest after harvest.
ماركة :
Zhongliang, Liannong, Agreap, Rnupower, JDREرقم الصنف :
HNشهادة :
ISO9001, ISO14001, ISO45001 and ISO50001قسط :
T/Tأصل المنتج :
Chinaميناء الشحن :
Shanghai Port, Ningbo Port, Tianjin Port, Lianyungang Portمهلة :
15-45 working days| Section | Dimensions | Manufacturing Length Range | ||
| Top Width(mm) | Height(mm) | Min.(inch/mm) | Max.(inch/mm) | |
| HN | 57.2 | 25.0 | 78.7/2000 | 626/15900 |
What Makes It Different?
√ Aramid Cord That Refuses to Stretch: Most replacement belts use polyester cord, which gradually elongates under load and forces you to re‑tension the drive. Our belt uses parallel‑laid aramid filaments – the same material found in ballistic protection – to keep the belt dimensionally stable. Once you tension it, it stays tensioned.
√ Chloroprene Formulated for the Field: Standard rubber hardens and cracks when soaked in oil or baked by engine heat. Our lab‑developed chloroprene blend retains its flexibility from well below freezing up to high operating temperatures, and it shrugs off the abrasive dust that fills the air during harvest.
√ Cogged Profile, Cooler Running: The precision‑molded cogs on the inner circumference let the belt bend easily around the small pulleys of the drive. Less bending resistance means less internal friction, so the belt runs cooler and lasts longer – a critical advantage when the machine is running flat out.
√ Engineered Alongside the Original: Because we are a direct source supplier, we work from the same specifications as the original equipment manufacturer. The dimensions, the rubber hardness, the cord tension – everything is matched so that the belt drops into place and performs exactly as the original did when the combine was new.
Where it works?
✅ CLAAS Combine Harvester – primary and auxiliary drives
✅Any drive on a CLAAS combine that demands a cogged, high‑flex belt
✅ Applications where small pulley diameters and high cycle rates would quickly destroy a standard belt
Technical Specifications & Applications
تتميز سلسلة الأحزمة المسننة V-belt المتغيرة السرعة HG HH HI HJ HK HM HN HO الفاخرة هذه بثبات استثنائي ومرونة فائقة، مما يزيد من كفاءة الطاقة في التطبيقات الزراعية. صُممت لتتحمل الغبار والرطوبة ودرجات الحرارة القصوى لعمر خدمة طويل.
اقرأ المزيد
The 68x24x2600Ld cogged V belt is precision engineered as a direct aftermarket replacement for Rostselmash （Gomselmash） combine harvesters where reliable power transmission under heavy harvesting loads is non negotiable . We manufacture this belt from the ground up in our 95000 square meter production complex reinforcing it with high tenacity aramid cord that virtually eliminates stretching and a specially formulated chloroprene rubber compound developed in our CNAS accredited laboratory and protected by national patents .
اقرأ المزيد
The 26268120 cogged V-belt is purpose‑built for the CLAAS combine harvester, where it must endure constant flexing and heavy shock loads. We engineer this belt from scratch in our own 95，000㎡ production complex, reinforcing it with high‑tenacity aramid cord that virtually eliminates stretching and a proprietary chloroprene compound developed in our CNAS‑accredited laboratory. Every batch is tested to confirm it delivers the same fit and staying power as the original CLAAS part, so you can install it and confidently return to the field knowing the drive train will keep working harvest after harvest.
اقرأ المزيد
The 47486562 is a high-performance cogged V-belt engineered for CLAAS combine harvesters, specifically designed for the HL 2855Le drive system. Manufactured in our 95，000㎡ production base with CNAS-certified laboratory validation and backed by 90+ national patents, this belt features a high-strength aramid cord core and a specially formulated chloroprene rubber compound, delivering OEM-identical performance, exceptional durability, and direct-from-source reliability.
اقرأ المزيد
سير V المسنن (ويُسمى أيضًا سير V المسنن)، هو سير لنقل الطاقة يجمع بين المقطع العرضي شبه المنحرف لأحزمة V التقليدية مع أخاديد عرضية (تروس) مصبوبة في الجانب الداخلي. تُقلل هذه الأخاديد من مقاومة الانحناء، وتُحسّن المرونة، وتُعزز تبديد الحرارة مع الحفاظ على عزم دوران عالٍ.
اقرأ المزيد
سير V الزراعي المسنن عالي التحمل هو سير نقل طاقة متخصص مصمم لظروف التشغيل القاسية في الآلات الزراعية. يجمع بين سطح داخلي مسنن (أخاديد عرضية) لمرونة فائقة وتبديد حراري ممتاز، وبنية معززة بعناصر شد عالية القوة وأغطية مقاومة للتآكل، ومركبات زراعية خاصة لتحمل التحديات البيئية كالغبار والرطوبة والتعرض للأشعة فوق البنفسجية. تم تصميم هذه الأحزمة لنقل عزم الدوران العالي في التطبيقات ذات الأحمال الصدمية والسرعات المتغيرة والتشغيل المستمر.
اقرأ المزيد
XPA وXPB وXPC وXPZ هي سلسلة من أحزمة V عالية الأداء مُسننة ومُدببة. يضمن تصميمها حركةً ثابتةً ومستويةً في البكرات المُحززة، مما يمنع دورانها وانزلاقها. يُعزز تصميمها المُسنن المُسنن المرونة، ويُقلل من تراكم الحرارة، ويسمح بتشغيلٍ فعالٍ على بكرات الدفع الأصغر حجمًا.
اقرأ المزيد
IPv6 الشبكة المدعومة
ترك رسالة
